Brighton is a small town, and the housing stock reflects that. Most of the homes here were built before the current generation of plumbing materials was standard, which means supply lines, drain runs, and fixture connections that have been in place for a long time. Older pipe materials, additions that were plumbed without drawings, and systems that have been patched more than once are the kinds of situations we walk into regularly. Whether it is a farmhouse with galvanized supply lines or a newer build whose fixtures have started failing, the work is the same: find the cause, explain it plainly, and fix it correctly.
We handle the full range of residential plumbing repair and installation for Brighton and the surrounding area. Drain cleaning, leak detection and repair, water heater replacement, sewer line service, fixture installation, repiping, and emergency calls are all part of what we do. We cover this part of Tipton County, and when you call, you get straight answers about your pipes and fixtures before anything is scheduled.
Scheduling starts on the call. You describe what is happening, we ask the questions that help scope the job, and we confirm a price before anything is put on the calendar. There is no form to fill out and no queue to join online.
Call (901) 256-5365 and the conversation handles the rest. We are available every day from 8:00 AM to 8:30 PM.
A burst pipe, a major leak, or a complete loss of hot water are not situations that wait for a convenient slot. We take urgent calls and handle short-notice work within our available schedule. We do not promise a specific arrival window, but we take emergency calls seriously and work through them as quickly as the day allows. When you call about something urgent, you reach someone who can scope the problem on the phone and tell you what to expect before anyone arrives.
For rental properties and occupied homes, we work through access arrangements on the call. If a tenant will be present, or if you need to coordinate access without being there yourself, we confirm how that will work before the visit. Partial isolation of a single line or fixture is often possible, which means the rest of the property keeps running while we address the affected section. We keep you informed from diagnosis to final test.
A lot of the older homes in this part of Tennessee sit on ground that collects water during heavy rain. A sump pump installed at the lowest point of a basement or crawl space moves that water out before it can cause damage. We install new units, replace failed ones, and assess existing pumps that are running but not performing well. A pump that runs constantly, fails to activate, or makes noise it did not used to make is worth having looked at before the next storm.
When a drain or sewer line is slow, backing up, or failing in a way that does not respond to standard clearing, the next step is a camera inspection. We run a camera through the line from a cleanout access point to see what is actually happening inside the pipe: root intrusion, cracks, collapsed sections, or buildup that a snake cannot shift. That inspection drives the repair recommendation rather than guessing from the surface.
Where the line needs repair and the damage is localized, trenchless methods can address it without digging up the yard. We explain what the camera found, describe the repair options, and confirm the price before any work starts.
A new appliance that is not connected correctly causes problems that look unrelated to the installation: slow draining, water on the floor, or a supply line that hammers when the machine cycles. We handle the full plumbing connection for washing machines and dishwashers, including the supply line, the drain connection, and the shutoff valve. Getting it right at installation avoids the call that comes six months later.
A new sink or vanity involves more than dropping the fixture into place. The drain connection, the supply lines, the shutoff valves, and the seal at the wall all have to be right. We handle fixture installation for kitchens and bathrooms, including garbage disposal installation where the kitchen sink is being updated. If the existing supply lines or shutoffs are corroded or undersized, we address those as part of the same visit rather than leaving a new fixture connected to old hardware that is likely to fail.
Low pressure at a single fixture is usually a different problem from low pressure throughout the whole house. A clogged aerator or a failing cartridge can reduce flow at one faucet without affecting anything else. Pressure that is low everywhere points further upstream: a failing pressure regulator, a main shutoff valve that is not fully open, or a supply line that has corroded down to a fraction of its original diameter.
Uneven pressure across a property is a third situation. If one part of the house has good flow and another does not, the cause is usually a branch line problem: a partially closed valve, a section of pipe with significant buildup, or a supply line that was undersized when the addition was plumbed. We diagnose by testing at multiple points in the system to narrow down where the drop is occurring before recommending a repair. Hydro jetting can restore flow in drain lines where buildup is the cause. For supply lines, the answer depends on what the diagnosis shows.
Some properties cannot simply shut down while plumbing work is done. A rental unit with a tenant in place, a home office that needs running water, or a small commercial space that serves customers during the day all require a different approach than a vacant property. We work through those constraints on the call. Which fixture or line is affected, which shutoff controls it, and whether the rest of the system can stay live while we work are all questions we ask before the visit rather than after we arrive.
Isolating the affected section often makes it possible to complete a repair with minimal disruption to the rest of the property. We treat your home the way we would want ours treated, and that applies to commercial spaces too. The goal is to finish the work and leave the property running correctly, not to create a second problem while solving the first. For what the job actually entails, our services page for plumbing work lays it out.
Sometimes a repair was started and not finished, or a plumber left a job in a state that created new problems. We take over work that is partway done. We assess what was done, what needs to be corrected, and what still needs to happen to get the system working correctly. The price for that work is confirmed before we proceed, the same as any other job.
A repair that holds for a few months and then fails again is usually a sign that the underlying cause was not addressed. A drain that clears and backs up again, a joint that was patched but is leaking at a new spot, or a fixture that was replaced but is still giving trouble all point to something further in the system. We scope the job from the symptom back to the source rather than repeating the same fix. A second opinion on a diagnosis you are not sure about is a reasonable thing to ask for, and we give straight answers about what we find.
The price is based on what the job involves. When you call, we ask about the situation, scope the work, and give you a rate before anything is scheduled. The things that move a quote are the things that cannot always be known from the surface: what the pipe condition turns out to be once it is accessible, whether the fault is in one section or has spread further, and what has to come apart to reach the problem. If the scope changes once we are on site, we explain what we found and confirm the updated price before continuing.
There is no separate pricing process for rental properties or multi-fixture jobs. The same conversation that scopes a single drain call scopes a larger repair.
Call (901) 256-5365 and ask what the work runs.
You get a clear answer on the call, before anything is scheduled. Local work. Sound pipes. Costs set out on the call.
We serve Brighton and the communities around it in Tipton County, including Atoka, Munford, Burlison, Gilt Edge, and Garland. If your property is in this part of the county and you need a plumber, call us and we will confirm coverage for your address. We are available every day from 8:00 AM to 8:30 PM.
Older homes in this part of Tipton County tend to have galvanized steel or early plastic supply lines that have been in place for decades, and those materials degrade in ways that cause recurring leaks and pressure loss. Drain lines in the same era of construction often have cast iron or clay sections that crack or collect root intrusion over time. Fixture shutoff valves that have never been exercised can seize in the open position, which means they will not close when you actually need them to. A call that starts as a single leak often turns up one of these underlying conditions once we get into the system.
Ask what the scope includes, what materials are being used, what the job involves day by day if it runs longer than one visit, and what would change the price once the work starts. A clear answer to each of those questions gives you a complete picture before you commit. We answer all of them on the call.
Not necessarily. We assess what access is needed once we know the scope of the job. If a boxed-in section needs to be opened to reach the pipe, we discuss that as part of the repair plan and explain what will need to be cut into and what the restoration involves.
Yes. We serve Brighton and the surrounding communities in Tipton County, including Burlison, Garland, Gilt Edge, Atoka, and Munford. Coverage for your specific address is confirmed on the call.
Call (901) 256-5365 and describe where the property is located and what you are dealing with, and we will let you know what we can schedule.
Yes. We walk through what was repaired or installed, confirm that everything is working correctly, and answer any questions before we leave. If a test is part of the process, such as running water through a repaired line or checking a water heater for correct output, we do that before the job is finished.
That is a reasonable thing to do for a larger project. What we can tell you is that when we scope a repipe, we explain what is being replaced, what materials are being used, and why the scope is what it is. Comparing quotes is easier when both are broken down the same way, so ask any contractor for that level of detail.
Once somebody has actually looked at the situation, you know where you stand. That is what the call is for. We scope the job, confirm the price, and get it on the schedule.
Call (901) 256-5365 to reach Cordova Plumbing Company. We are available every day from 8:00 AM to 8:30 PM.
Have a look at our list of communities. Plumbing work in the surrounding towns: Atoka, Munford, Covington.
From a backed-up kitchen drain to a full-home repipe, we handle the complete range of residential and commercial plumbing work across Brighton and Tipton County. Each service below covers what the job involves, who it fits, and what is worth knowing before you call. The price is set out on the call before anything is scheduled, so you go in with a clear picture of the work and the cost.
| Service | Scope of Work | Typical Situations | Things to Keep in Mind |
|---|---|---|---|
| Sewer & Main Line Service | Main sewer line clearing and inspectionRoot intrusion removalLine repair and replacement | Properties with slow drains throughout the house, sewage odor, or recurring backups | Gurgling from multiple fixtures at once is a reliable sign the problem is in the main line rather than a single branch drain. |
| Water Heater Repair & ReplacementMost Popular | Tank and tankless unit diagnosisElement, thermostat, and valve repairFull unit replacement with sizing discussion | Households with no hot water, inconsistent temperature, or an aging unit | Sediment buildup is a common cause of reduced output and shorter unit life, and it is worth addressing before the tank itself fails. |
| Garbage Disposal Service | Disposal repair and resetFull unit replacementDrain line connection and seal confirmation | Disposals that have stopped working, jam frequently, or are being installed for the first time | A disposal that hums but does not spin is usually jammed rather than failed, and can often be cleared without replacement. |
Call (901) 256-5365 and we will walk through the work, explain what it covers, and give you the price before anything is scheduled.
(901) 256-5365